Toyota Freestyle GT
Toyota Freestyle GT
Lexusboy Are you looking to add a reverse light as that will need to be added for the mot sva.
:wink:
![[Image: 15368_340279265472_587840472_9737051_8205902_n.jpg]](https://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs086.snc3/15368_340279265472_587840472_9737051_8205902_n.jpg)
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-09-2017, 06:37 AM #81Lexusboy Are you looking to add a reverse light as that will need to be added for the mot sva.
:wink:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
So Demon would look to add four lights, each cluster.
Demon showing three but you need a fog light plus i guessing would go on one side the the reverse light would go on the other side cluster.
Lexusboy I was meaning to the cluster unit?:wink:
So Demon would look to add four lights, each cluster.
Demon showing three but you need a fog light plus i guessing would go on one side the the reverse light would go on the other side cluster.
He said he was going to put them either side of the number plate though ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-09-2017, 07:11 AM #83Lexusboy I was meaning to the cluster unit?:wink:
So Demon would look to add four lights, each cluster.
Demon showing three but you need a fog light plus i guessing would go on one side the the reverse light would go on the other side cluster.
He said he was going to put them either side of the number plate though ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
I was going to add one reverse light on one side of the number plate and the rear fog on the other side??? Although i could make one of the top sets of stop/tail lights become the rear fog and then buy another reverse light and have 2 reverse lights next to the rear number plate??? I Guess it would even up the colours on the back, or do i keep it as is?
Jason
LOL at both of you
I was going to add one reverse light on one side of the number plate and the rear fog on the other side??? Although i could make one of the top sets of stop/tail lights become the rear fog and then buy another reverse light and have 2 reverse lights next to the rear number plate??? I Guess it would even up the colours on the back, or do i keep it as is?
Jason
Girlfriend gave me a few hours away from her so i got to go and check a few little bits on the buggy before i was back in my cage
They have confirmed that they will get the front end cleaned up this week and the brackets removed so when im up there next saturday i can get the coilovers onto the front and the new brackets welded on
While i was up there i also roughly tapped the light template sinto place to see what they will look like on the buggy. I have two options really, either the lights sit above the rear bar or bellow the rear bar. To me they look better sat below (second set of pics) but let me know what you guys think. I still have to sort out placement for the rear fog and reverse ligts which i think will sit below the number plate (still fine for IVA).
lights above bar.......
![[Image: 13559_342354675472_587840472_9760509_5119053_n.jpg]](https://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs068.snc3/13559_342354675472_587840472_9760509_5119053_n.jpg)
![[Image: 13559_342354690472_587840472_9760510_319783_n.jpg]](https://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs048.snc3/13559_342354690472_587840472_9760510_319783_n.jpg)
lights bellow bar......
![[Image: 13559_342354700472_587840472_9760511_3661612_n.jpg]](https://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs048.snc3/13559_342354700472_587840472_9760511_3661612_n.jpg)
![[Image: 13559_342354710472_587840472_9760512_5240265_n.jpg]](https://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs048.snc3/13559_342354710472_587840472_9760512_5240265_n.jpg)
I will be up there working on the buggy next saturday and if i get time i will get it outside and get some proper decent pics of it
any comments welcome people?!?!?
Jason
*** Mini update ****
Girlfriend gave me a few hours away from her so i got to go and check a few little bits on the buggy before i was back in my cage
They have confirmed that they will get the front end cleaned up this week and the brackets removed so when im up there next saturday i can get the coilovers onto the front and the new brackets welded on
While i was up there i also roughly tapped the light template sinto place to see what they will look like on the buggy. I have two options really, either the lights sit above the rear bar or bellow the rear bar. To me they look better sat below (second set of pics) but let me know what you guys think. I still have to sort out placement for the rear fog and reverse ligts which i think will sit below the number plate (still fine for IVA).
lights above bar.......
lights bellow bar......
I will be up there working on the buggy next saturday and if i get time i will get it outside and get some proper decent pics of it
any comments welcome people?!?!?
Jason
Lexusboy Demon when are you going to be polishing the bug.
I am happy to give you some free advice while you reclean mine:wink:
You don't look like you have to much left to do now...
Cheeky git!!!!! :Bazza::laugh: I can't be arsed to clean 1 car let alone 2!
It lloks like its getting there but there is a HUGE list of things to do, some of these include:
Get custom driveshafts made
Wiring!!! I need to make a interior loom from scratch
engine needs oil change, new clutch, etc
make induction kit from scratch
sort out rear brakes
Finish off the front coilovers
buy and adapt rear coilovers
sort out lights on the back
sort out lights on the front
fabricate supports for front mount rad
run coolant pipes length of the car
change steering position
fabricate seat frames
sort out fuel cell, pump and lines
make arch mounts
There is ALOT im missing off this list and every little job always takes 10 times longer than you think it will as every job needs custom fabricated parts that need to be made from scratch most of the time.
And then when its all done i need to get over to WIM for the chassis/suspension setup and begin working through the paperwork :mad:
Lexusboy Demon when are you going to be polishing the bug.
I am happy to give you some free advice while you reclean mine:wink:
You don't look like you have to much left to do now...
Cheeky git!!!!! :Bazza::laugh: I can't be arsed to clean 1 car let alone 2!
It lloks like its getting there but there is a HUGE list of things to do, some of these include:
Get custom driveshafts made
Wiring!!! I need to make a interior loom from scratch
engine needs oil change, new clutch, etc
make induction kit from scratch
sort out rear brakes
Finish off the front coilovers
buy and adapt rear coilovers
sort out lights on the back
sort out lights on the front
fabricate supports for front mount rad
run coolant pipes length of the car
change steering position
fabricate seat frames
sort out fuel cell, pump and lines
make arch mounts
There is ALOT im missing off this list and every little job always takes 10 times longer than you think it will as every job needs custom fabricated parts that need to be made from scratch most of the time.
And then when its all done i need to get over to WIM for the chassis/suspension setup and begin working through the paperwork :mad:
Reason i ask is you might want to contact John Fuggles as i not 100% sure there allow your little beauty in I would hate you to drive it all the way and not be allowed in.
I am happy to ask John for you if your rather.
Still looks good though MATE, are you still looking to bring this super buggy to JAE next year.
Reason i ask is you might want to contact John Fuggles as i not 100% sure there allow your little beauty in I would hate you to drive it all the way and not be allowed in.
I am happy to ask John for you if your rather.
Lexusboy Still looks good though MATE, are you still looking to bring this super buggy to JAE next year.
Reason i ask is you might want to contact John Fuggles as i not 100% sure there allow your little beauty in I would hate you to drive it all the way and not be allowed in.
I am happy to ask John for you if your rather.
Hmmm might need to speak to him i guess. Not too sure if i will bring it yet as it may not be finished?!?!? There is plenty of time though so it can wait.
Is mister fuggles a member on here?
Jason
Lexusboy Still looks good though MATE, are you still looking to bring this super buggy to JAE next year.
Reason i ask is you might want to contact John Fuggles as i not 100% sure there allow your little beauty in I would hate you to drive it all the way and not be allowed in.
I am happy to ask John for you if your rather.
Hmmm might need to speak to him i guess. Not too sure if i will bring it yet as it may not be finished?!?!? There is plenty of time though so it can wait.
Is mister fuggles a member on here?
Jason
Sorry he not a member on here he from the club that was park next to us with the skyline at JAE
Jason your need to contact him from here http://www.japcarclub.com/forums/index.php
Sorry he not a member on here he from the club that was park next to us with the skyline at JAE
1 Guest(s)
1 Guest(s)
Views 5,212
Last Post by
Views 14,652
Last Post by
Views 59,740
Last Post by
Views 1,672
Last Post by
Views 4,389
Last Post by
Views 4,844
Last Post by
Views 2,778
Last Post by
Views 7,911
Last Post by