JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Workshop - Submit Your Tip! JDM fog mod(with out the yellow dome)

JDM fog mod(with out the yellow dome)

JDM fog mod(with out the yellow dome)

Pages (3): 1 2 3 Next
ormi
Posting Freak
3,006
11-10-2017, 06:47 PM
#1
well for all you's that wanna do this its not hard dont need to remove the bumper to get to the fogs and its easyer to do than the headlights

remove the fog light.
[Image: p2211091335.jpg]
now for the important part the oven 150 for ten mins(but keep an eye on the oven)
[Image: p2211091341.jpg]
now with the glue soft you should be able to peel the lense off and remove the silver bit
[Image: p2211091345.jpg]
now scuff the silver bit up with a scouring pad
[Image: p2211091347.jpg]
now time to prime
[Image: p2211091348.jpg]
once the primer is dry time to paint i used mat black
[Image: p2211091401.jpg]
now fit your newly painted black bit in to the lense(once dry of course)
[Image: p2211091726.jpg]
now put the housing back in the oven to soften the glue(approx 10 mins)then push the two parts together till the wee clips locate job done!!
[Image: p2211091423.jpg]

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
11-10-2017, 06:47 PM #1

well for all you's that wanna do this its not hard dont need to remove the bumper to get to the fogs and its easyer to do than the headlights

remove the fog light.
[Image: p2211091335.jpg]
now for the important part the oven 150 for ten mins(but keep an eye on the oven)
[Image: p2211091341.jpg]
now with the glue soft you should be able to peel the lense off and remove the silver bit
[Image: p2211091345.jpg]
now scuff the silver bit up with a scouring pad
[Image: p2211091347.jpg]
now time to prime
[Image: p2211091348.jpg]
once the primer is dry time to paint i used mat black
[Image: p2211091401.jpg]
now fit your newly painted black bit in to the lense(once dry of course)
[Image: p2211091726.jpg]
now put the housing back in the oven to soften the glue(approx 10 mins)then push the two parts together till the wee clips locate job done!!
[Image: p2211091423.jpg]


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Sparkystav
Administrator
14,683
11-10-2017, 07:25 PM
#2
Good write up mate.

OutlawJapClub Admin Team
Sparkystav
11-10-2017, 07:25 PM #2

Good write up mate.


OutlawJapClub Admin Team

spikes
Posting Freak
1,153
11-10-2017, 07:31 PM
#3
nice walkthough ormiSmile
spikes
11-10-2017, 07:31 PM #3

nice walkthough ormiSmile

jay_russell
Posting Freak
3,005
24-12-2017, 03:24 PM
#4
good work mate. doing mine today
jay_russell
24-12-2017, 03:24 PM #4

good work mate. doing mine today

Chri5
Posting Freak
1,894
24-12-2017, 09:44 PM
#5
that looks easy enough Wink
think i'll try that as my fogs look a bit manky.

what gas mark is 150???
if i need to speed things up will 3mins in the microwave do lol Wink
Chri5
24-12-2017, 09:44 PM #5

that looks easy enough Wink
think i'll try that as my fogs look a bit manky.

what gas mark is 150???
if i need to speed things up will 3mins in the microwave do lol Wink

Moley
Posting Freak
6,230
24-12-2017, 09:45 PM
#6
Chri5 that looks easy enough Wink
think i'll try that as my fogs look a bit manky.

what gas mark is 150???
if i need to speed things up will 3mins in the microwave do lol Wink

:lol::lol::lol::lol::thumbup:

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
24-12-2017, 09:45 PM #6

Chri5 that looks easy enough Wink
think i'll try that as my fogs look a bit manky.

what gas mark is 150???
if i need to speed things up will 3mins in the microwave do lol Wink

:lol::lol::lol::lol::thumbup:


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Asi
Posting Freak
2,510
24-12-2017, 09:54 PM
#7
great write up mate. i already have black ones which i may sell if i am going for the replica legana bumper

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
24-12-2017, 09:54 PM #7

great write up mate. i already have black ones which i may sell if i am going for the replica legana bumper


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

steviewevie
Posting Freak
7,993
25-12-2017, 05:43 AM
#8
Chri5 what gas mark is 150???

Gas mark 2 Wink

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
25-12-2017, 05:43 AM #8

Chri5 what gas mark is 150???

Gas mark 2 Wink


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Lexusboy
Posting Freak
9,267
25-12-2017, 06:03 AM
#9
Good write up mate,:thumbup1:
Front lens now need cleaning and polishing follow this walk through by Patrick:
http://www.outlawjapclub.co.uk/forum/sho...php?t=2194
Lexusboy
25-12-2017, 06:03 AM #9

Good write up mate,:thumbup1:
Front lens now need cleaning and polishing follow this walk through by Patrick:
http://www.outlawjapclub.co.uk/forum/sho...php?t=2194

ormi
Posting Freak
3,006
31-12-2017, 06:32 PM
#10
were you getting your paint??mine was only £3.50 for mat black.

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
31-12-2017, 06:32 PM #10

were you getting your paint??mine was only £3.50 for mat black.


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Pages (3): 1 2 3 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)