headlight prob!
headlight prob!
29-11-2017, 05:32 AM
Rabster hmmm ummm have you checked continuity from the conector plate to the cable this can be done with a multimeter and a stanley knife
no need to cut the cable just use a sharp blade and hold the vable on the blade it will make a connection if there is continuity
Ooh, nice tip, never thought of that before :thumbup1:
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
29-11-2017, 05:32 AM #11Rabster hmmm ummm have you checked continuity from the conector plate to the cable this can be done with a multimeter and a stanley knife
no need to cut the cable just use a sharp blade and hold the vable on the blade it will make a connection if there is continuity
Ooh, nice tip, never thought of that before :thumbup1:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
29-11-2017, 12:14 PM
widnes_is200
29-11-2017, 12:14 PM #13right all wires re wired, butt this is the prob , no dipped beam at all butt if i earth out the red and purple wire on the multiplug or earthout the same wire on the stalk the dip come on so has anybody any idea at all?, im thinking of trying replacing the stalk next butt dont know, has anybody got a wire diagram for the light stalk at all? cheers
29-11-2017, 12:18 PM
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
29-11-2017, 12:18 PM #15i replaced my theft control unit which controls the lights and tons of other things and that has done the trick
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
29-11-2017, 12:28 PM
Rabster ok so if you earth it out it works what if you check for power on that cable when you switch the lights/dip beam on ? do you get anything
if not then yes the stalk is at fault if you do then its something else...
its eems to be constantly live both at the multiplug and stalk when earthed lites come on dip, head wrecking now!
widnes_is200
29-11-2017, 12:28 PM #16Rabster ok so if you earth it out it works what if you check for power on that cable when you switch the lights/dip beam on ? do you get anything
if not then yes the stalk is at fault if you do then its something else...
its eems to be constantly live both at the multiplug and stalk when earthed lites come on dip, head wrecking now!
29-11-2017, 12:51 PM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
29-11-2017, 12:51 PM #17The wiring diagram for the headlights (2001 onwards) is here.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
29-11-2017, 01:02 PM
widnes_is200
29-11-2017, 01:02 PM #18cheers steve, ive just been looking at the theft control unit and the same wire ive been checking goes into this. tempted to try this while theres one at the brakers, what do u think?
29-11-2017, 01:05 PM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
29-11-2017, 01:05 PM #19I would pick it up and give it a go, especially since Aaron found it sorted his problem out.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
29-11-2017, 01:49 PM
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
29-11-2017, 01:49 PM #20it worked for me,the fault in the fuse board caused the theft control unit to short causing the lights to fail
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 6
Views 419
Views 419
31-10-2020, 07:50 PM
Last Post byrigga
Last Post by
Replies 13
Views 972
Views 972
27-08-2020, 07:55 PM
Last Post byparthiban
Last Post by
Replies 25
Views 1,601
Views 1,601
07-08-2020, 07:00 PM
Last Post byChris0121
Last Post by
Replies 11
Views 1,003
Views 1,003
07-08-2020, 03:11 PM
Last Post byparthiban
Last Post by
Replies 2
Views 370
Views 370
08-05-2020, 06:28 PM
Last Post byjasons
Last Post by
Replies 4
Views 501
Views 501
09-04-2020, 04:39 AM
Last Post bypurplewitch
Last Post by
Replies 8
Views 760
Views 760
07-03-2020, 04:36 AM
Last Post bynimrodmk3
Last Post by
Replies 6
Views 573
Views 573
21-12-2019, 06:25 PM
Last Post byis300_dino
Last Post by
Replies 15
Views 1,356
Views 1,356
04-07-2019, 09:10 AM
Last Post bymattross1313
Last Post by