Footwell LED's....How To
Footwell LED's....How To
14-12-2017, 08:43 AM
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
Still haven't got round to doing this myself either! But I was planning to run one wire out of the ignition barrel, put the fuse and diode on this and then split that to the two strips - will that not work?
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
14-12-2017, 09:19 AM
Rabs
Mine and woz are done as parthiban stated the diode must be installed to stop power being fed back into the mpx controll when the doors are shut both wires on the ignition illumination are at +12v open the door and one goes to ground thus making the circuit required diode and fuse must go on the 12v constant feed
Rabs
14-12-2017, 10:07 AM
Rabster Mine and woz are done as parthiban stated the diode must be installed to stop power being fed back into the mpx controll when the doors are shut both wires on the ignition illumination are at +12v open the door and one goes to ground thus making the circuit required diode and fuse must go on the 12v constant feed
Rabs
Not sure how many more years it'll be before I fit these but cheers for clearing that up :biggrin:
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
Rabster Mine and woz are done as parthiban stated the diode must be installed to stop power being fed back into the mpx controll when the doors are shut both wires on the ignition illumination are at +12v open the door and one goes to ground thus making the circuit required diode and fuse must go on the 12v constant feed
Rabs
Not sure how many more years it'll be before I fit these but cheers for clearing that up :biggrin:
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
14-12-2017, 10:24 AM
parthiban Not sure how many more years it'll be before I fit these but cheers for clearing that up :biggrin:
same here mate......gonna try and make some time this weekend.....or maybe next....or the one after :laugh::biggrin:.....what amp wire should be used?
parthiban Not sure how many more years it'll be before I fit these but cheers for clearing that up :biggrin:
same here mate......gonna try and make some time this weekend.....or maybe next....or the one after :laugh::biggrin:.....what amp wire should be used?
14-12-2017, 10:39 AM
SHAHZ
Lol, and the weather isn't helping! :lol:
Good question about the wire, although I think the strips I have have quite a lot of wire attached, can I just cut off some of the excess and use that?
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
SHAHZ
Lol, and the weather isn't helping! :lol:
Good question about the wire, although I think the strips I have have quite a lot of wire attached, can I just cut off some of the excess and use that?
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
14-12-2017, 11:04 AM
....tell me about it, its supposed to get quite cold again this week:thumbdown:......Suppose it could be used.....although it looks a little weedy, so might just use something a littlethicker..........got a reel of some 2.5mm cable somewhere i think, if not ive got some twin & earth electrical cable i can cut out of the sheath
23-04-2019, 08:26 PM
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
23-04-2019, 08:26 PM #29keith is still about yes, send him a pm and im sure he will upload the pictures again
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
03-09-2019, 01:25 PM
Though it is not that hard to do without the pics. You can make brackets however you like, I will probably just use cable ties! Other than that, it is just a case of wiring into the ignition ring, which may involve extending the wires. I will try to take pics when I get round to mine and will post them then.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Try a PM to the original poster.
Though it is not that hard to do without the pics. You can make brackets however you like, I will probably just use cable ties! Other than that, it is just a case of wiring into the ignition ring, which may involve extending the wires. I will try to take pics when I get round to mine and will post them then.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)