1st proper clean

JapCarForum Cars, Cars, Cars! Car Care & Detailing 1st proper clean

1st proper clean

1st proper clean

Pages (2): 1 2 Next

rig-pig
Junior Member

46

24-12-2017, 06:35 AM

#1

that's the car had its 1st proper clean since i got it just over a week ago just need the better weather before i get the clay out

[Image: Photo008.jpg]

[Image: Photo008.jpg]

[Image: Photo009.jpg]

[Image: Photo012.jpg]

[Image: Photo015.jpg]

[Image: Photo016.jpg]

[Image: Photo017.jpg]

[Image: Photo019.jpg]

Some new mats as well get rid of the Subaru rubber ones

[Image: Photo020.jpg]

[Image: Photo020.jpg]

[Image: Photo021.jpg]

[Image: Photo022.jpg]

[Image: Photo023.jpg]

[Image: Photo024.jpg]

[Image: Photo025.jpg]

[Image: Photo026.jpg]

some of the stuff i use just now but i have put in an order with "polished bliss" for products i was recomended while i was on http://www.detailingworld.co.uk/forum/index.php
there is a lot of good info on here

[Image: Photo008-1.jpg]

[Image: Photo008-1.jpg]

[Image: Photo009-1.jpg]

[Image: Photo010.jpg]

[Image: Photo003-1-1.jpg]

Craig

time served car mechanic
now a rig monkey

rig-pig

24-12-2017, 06:35 AM #1

that's the car had its 1st proper clean since i got it just over a week ago just need the better weather before i get the clay out

[Image: Photo008.jpg]

[Image: Photo009.jpg]

[Image: Photo012.jpg]

[Image: Photo015.jpg]

[Image: Photo016.jpg]

[Image: Photo017.jpg]

[Image: Photo019.jpg]

Some new mats as well get rid of the Subaru rubber ones

[Image: Photo020.jpg]

[Image: Photo021.jpg]

[Image: Photo022.jpg]

[Image: Photo023.jpg]

[Image: Photo024.jpg]

[Image: Photo025.jpg]

[Image: Photo026.jpg]

some of the stuff i use just now but i have put in an order with "polished bliss" for products i was recomended while i was on http://www.detailingworld.co.uk/forum/index.php
there is a lot of good info on here

[Image: Photo008-1.jpg]

[Image: Photo009-1.jpg]

[Image: Photo010.jpg]

[Image: Photo003-1-1.jpg]

Craig

time served car mechanic
now a rig monkey

steviewevie
Posting Freak

7,993

24-12-2017, 06:53 AM

#2

Good job there mate :thumbup1:

[Image: Sig-enginebay.jpg]

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

steviewevie

24-12-2017, 06:53 AM #2

Good job there mate :thumbup1:

[Image: Sig-enginebay.jpg]

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Bandit
Posting Freak

6,464

24-12-2017, 07:05 AM

#3

Very nice mate, Did you machine polish or do it by hand? :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:

Now Don't Forget The REP!!!

Bandit

24-12-2017, 07:05 AM #3

Very nice mate, Did you machine polish or do it by hand? :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:

Now Don't Forget The REP!!!

Lexusboy
Posting Freak

9,267

24-12-2017, 09:37 AM

#4

Car looks good you spent some hours cleaning it .

What is the g3 compound like to use?

Lexusboy

24-12-2017, 09:37 AM #4

Car looks good you spent some hours cleaning it .

What is the g3 compound like to use?

Bandit
Posting Freak

6,464

24-12-2017, 10:17 AM

#5

The G3 works very well mate, i've got some here and have used it a few times to clean the paint, good to keep it moving and a little damp so it doesn't dig too deep into the paint :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:

Now Don't Forget The REP!!!

Bandit

24-12-2017, 10:17 AM #5

The G3 works very well mate, i've got some here and have used it a few times to clean the paint, good to keep it moving and a little damp so it doesn't dig too deep into the paint :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:

Now Don't Forget The REP!!!

Lexusboy
Posting Freak

9,267

24-12-2017, 11:21 AM

#6

Can you use a machine to apply and if so any idea on speed low med or high?

Lexusboy

24-12-2017, 11:21 AM #6

Can you use a machine to apply and if so any idea on speed low med or high?

Asi
Posting Freak

2,510

24-12-2017, 12:59 PM

#7

Looking good mate

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Asi

24-12-2017, 12:59 PM #7

Looking good mate

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

ormi
Posting Freak

3,006

24-12-2017, 07:15 PM

#8

Lexusboy Can you use a machine to apply and if so any idea on speed low med or high?

yip mate you can use the machine mate when i watch the valeters use it their buff is on a med setting..

[Image: ormiedit1-2.jpg]

TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

ormi

24-12-2017, 07:15 PM #8

Lexusboy Can you use a machine to apply and if so any idea on speed low med or high?

yip mate you can use the machine mate when i watch the valeters use it their buff is on a med setting..

[Image: ormiedit1-2.jpg]

TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

russelllinn
Posting Freak

1,034

24-12-2017, 07:21 PM

#9

Awesome job there, she is blinging :thumbup:

russelllinn

24-12-2017, 07:21 PM #9

Awesome job there, she is blinging :thumbup:

spikes
Posting Freak

1,153

24-12-2017, 08:31 PM

#10

mmm nice shine:thumbup1:

spikes

spikes

24-12-2017, 08:31 PM #10

mmm nice shine:thumbup1:

spikes

Pages (2): 1 2 Next

Recently Browsing
1 Guest(s)

Recently Browsing
1 Guest(s)

Related Threads…

Gave the Mazda Eunos a clean :-)
by Bandit

Replies 9
Views 1,499

15-06-2020, 04:52 PM
Last Post by Bandit

How do you clean your engine bay?
by jimxms

Replies 16
Views 2,102

20-05-2019, 06:34 PM
Last Post by Bonney

Like to clean your car?
by Sparkystav

Replies 27
Views 2,429

04-03-2018, 04:34 PM
Last Post by Asi

Gave the car a clean, pics, I know you like your pics.
by Andy-R.

Replies 11
Views 1,387

02-03-2018, 03:07 PM
Last Post by Andy-R.

Quick Engine Bay clean-up
by steviewevie

Replies 14
Views 1,734

18-05-2017, 07:59 PM
Last Post by Bandit