JDM fog mod(with out the yellow dome)

Pages (3): Previous 1 2 3 Next

Chri5
Posting Freak

1,894

31-12-2017, 06:37 PM

#11

And poundland sell paint an primer for £1(bizzarely) a tin Smile

Chri5

31-12-2017, 06:37 PM #11

And poundland sell paint an primer for £1(bizzarely) a tin Smile

Asi
Posting Freak

2,510

31-12-2017, 06:44 PM

#12

you cna buy them from ebay aswell

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Asi

31-12-2017, 06:44 PM #12

you cna buy them from ebay aswell

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

jay_russell
Posting Freak

3,005

01-01-2018, 04:44 AM

#13

yes and the same way.... heat them in the oven then pull them apart

jay_russell

01-01-2018, 04:44 AM #13

yes and the same way.... heat them in the oven then pull them apart

jay_russell
Posting Freak

3,005

01-01-2018, 04:57 AM

#14

i put mine in for 10 minutes then opened them up sprayed them up and then reheated them again and put the back together..... not so hard as it seams.... just put the oven on a low heat.. 125 c and watch the time. after i pulled them apart i used my finger to clean up the glue. by pushing it back onto the edge of the glass. so it goes back together without putting glue over the black painted cover

jay_russell

01-01-2018, 04:57 AM #14

jay_russell
Posting Freak

3,005

01-01-2018, 02:20 PM

#15

i used plastic primer.

jay_russell

01-01-2018, 02:20 PM #15

i used plastic primer.

Chri5
Posting Freak

1,894

02-01-2018, 02:39 PM

#16

Right I got my primer and gloss black paint and laquor if I decide to use it.
But how do you get the fog lights out Sad

???

Chri5

02-01-2018, 02:39 PM #16

Right I got my primer and gloss black paint and laquor if I decide to use it.
But how do you get the fog lights out Sad ???

jay_russell
Posting Freak

3,005

02-01-2018, 03:19 PM

#17

first you release the 2 bolts on the inside of the lamps. if you look at the front of the light on the side are 2 no10 bolts on it once you have done that you need to release the wheel arch liner a little bit so take out the 2 poppers and get your hand behind it and take a torch and look at the back of the light you will see a plastic clip. get a flat screw driver behind it and release it then they just pull out
[Image: SDC11624.jpg]

jay_russell

02-01-2018, 03:19 PM #17

Chri5
Posting Freak

1,894

02-01-2018, 03:23 PM

#18

Thank you

I will give that a go 2morro when I've more patience and light Smile

Chri5

02-01-2018, 03:23 PM #18

Thank you Wink
I will give that a go 2morro when I've more patience and light Smile

Jambo
Posting Freak

1,125

02-01-2018, 04:37 PM

#19

I liked the microwave comment xD.

Looks like a good little mod here Smile

Nice thread!

Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]

Jambo

02-01-2018, 04:37 PM #19

I liked the microwave comment xD.

Looks like a good little mod here Smile Nice thread!

Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]

Chri5
Posting Freak

1,894

02-01-2018, 04:48 PM

#20

Does look a good mod and I want to know if the headlights cud be done in the same way???

Chri5

02-01-2018, 04:48 PM #20

Does look a good mod and I want to know if the headlights cud be done in the same way???

Pages (3): Previous 1 2 3 Next

Recently Browsing
1 Guest(s)