koka and his projekt
koka and his projekt
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
seems good mate,
though maybe a HKS SSQV instead of the one you have? as the SSQV works more on differential pressure than mainly spring pressure like the others
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Interesting project you have going there, loving the exhausts.
![[Image: kw%20diagram%20lauf2.jpg]](https://lh6.ggpht.com/_I4XgGtU6vZo/S37hxmr15tI/AAAAAAAACkw/MN-gvsL1AMA/kw%20diagram%20lauf2.jpg)
![[Image: druck%20diagram%20lauf%202.jpg]](https://lh5.ggpht.com/_I4XgGtU6vZo/S37hxYlVE6I/AAAAAAAACks/-C3l309sn1w/druck%20diagram%20lauf%202.jpg)
Sorry boys, the IS does not have 240bhp. at the dyno the belt slipped at 4500rpm, so I had to 5500rpm only 0.38 bar. and therefore he has only 209bhp at 5500rpm.
EDIT:
here some results
![[Image: kw%20diagram%20lauf2.jpg]](https://lh6.ggpht.com/_I4XgGtU6vZo/S37hxmr15tI/AAAAAAAACkw/MN-gvsL1AMA/kw%20diagram%20lauf2.jpg)
and here the zeitronix log
![[Image: druck%20diagram%20lauf%202.jpg]](https://lh5.ggpht.com/_I4XgGtU6vZo/S37hxYlVE6I/AAAAAAAACks/-C3l309sn1w/druck%20diagram%20lauf%202.jpg)
you see, if the belt did not slipped, it had more power at 6300rpm maybe
![[Image: druck%20diagram%20lauf%202.jpg]](https://lh5.ggpht.com/_I4XgGtU6vZo/S37hxYlVE6I/AAAAAAAACks/-C3l309sn1w/druck%20diagram%20lauf%202.jpg)
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
![[Image: druck%20diagram%20lauf%202.jpg]](https://lh5.ggpht.com/_I4XgGtU6vZo/S37hxYlVE6I/AAAAAAAACks/-C3l309sn1w/druck%20diagram%20lauf%202.jpg)
Thats dangerously lean mate from 4k onwards! what ecu controls your injectors and bigger pulley?
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)