two bits i will be fitting after work tomorrow
two bits i will be fitting after work tomorrow
16-01-2018, 11:04 AM
http://cgi.ebay.co.uk/PLASMA-DISPLAY-TUR...2556a2b517
0.3 bar is 4.3 psi so it will fill half of this gauge
jay_russell
16-01-2018, 11:04 AM #21if that is the case the get a psi gauge that will be better, have a look at this and then you will see
http://cgi.ebay.co.uk/PLASMA-DISPLAY-TUR...2556a2b517
0.3 bar is 4.3 psi so it will fill half of this gauge
16-01-2018, 11:11 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-01-2018, 11:11 AM #22That gauge goes up to 30 psi, which is about 2 bar though ? :confused1:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
16-01-2018, 11:18 AM
steviewevie The one I've got in my car (admittedly for more than 0.3 bar boost hopefully !) goes up to 1.2 bar, so would be better for an s/c car than a 2 bar gauge (Defi Advance CR) :
![[Image: tb120-52bk.jpg]](http://www.defi-shop.com/product/acr/images/meters/tb120-52bk.jpg)
Ok Steve if it better for a SC car I'll swap you my Defi gauge for it :drink:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
steviewevie The one I've got in my car (admittedly for more than 0.3 bar boost hopefully !) goes up to 1.2 bar, so would be better for an s/c car than a 2 bar gauge (Defi Advance CR) :
Ok Steve if it better for a SC car I'll swap you my Defi gauge for it :drink:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
16-01-2018, 03:25 PM
dimis Stevie have you also got this part? DEFI Advance CR Control Unit for your boost gauge?
Yep. Pics of it (not in the car though) here.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-01-2018, 03:25 PM #25dimis Stevie have you also got this part? DEFI Advance CR Control Unit for your boost gauge?
Yep. Pics of it (not in the car though) here.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
16-01-2018, 03:25 PM
Moley Ok Steve if it better for a SC car I'll swap you my Defi gauge for it :drink:
ok let me think about that for a second .. no thanks
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-01-2018, 03:25 PM #26Moley Ok Steve if it better for a SC car I'll swap you my Defi gauge for it :drink:
ok let me think about that for a second .. no thanks
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
17-01-2018, 05:17 PM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
well fitted the guage last night love it and its done what i wanted it too do, check the boosting pressure.......its only boosting at .2bar(instead of .35bar) and it tails off so i think i'll need too check ,tighten/replace the pipe clips..as i'm loosing pressure somewhere.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
![[Image: clubbanner.gif]](http://www.ranatech.co.uk/evo/clubbanner.gif)
17-01-2018, 06:05 PM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
i'll post one tomorrow matey does look nice though....thanks again matey...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
19-01-2018, 04:52 PM
![[Image: p020310191601.jpg]](http://img401.imageshack.us/img401/8271/p020310191601.jpg)
note the nasty crack.......new screen very soon...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
well heres the pic of the guage
note the nasty crack.......new screen very soon...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 14
Views 980
Views 980
09-06-2022, 04:33 PM
Last Post byreganlives
Last Post by
Replies 3
Views 374
Views 374
01-07-2021, 10:30 AM
Last Post bySparkystav
Last Post by
Replies 15
Views 1,029
Views 1,029
10-12-2020, 04:34 PM
Last Post byLexuspat
Last Post by
Replies 13
Views 1,159
Views 1,159
27-08-2020, 07:55 PM
Last Post byparthiban
Last Post by
Replies 6
Views 791
Views 791
02-08-2020, 07:55 AM
Last Post byMatt_C
Last Post by
Replies 8
Views 682
Views 682
20-04-2020, 05:01 PM
Last Post byFirebirdPhil
Last Post by
Replies 6
Views 722
Views 722
07-02-2020, 07:36 AM
Last Post byjasons
Last Post by
Replies 10
Views 1,157
Views 1,157
09-01-2020, 05:55 PM
Last Post byS
Last Post by
Replies 6
Views 1,333
Views 1,333
12-11-2019, 07:17 PM
Last Post bydavidjamesbattersby
Last Post by