Engine Covers
Engine Covers
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
The cover is something i made out of sheet steel, then i sprayed the sun pattern onto it, also sprayed all the engine covers to follow on the design so it looked all one pattern:thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
09-03-2018, 04:19 AM #14Trouble is that it depends on your induction kit etc, so I'm not sure a single cover would fit lots of different cars, unless you made it quite small and only covering part of the engine. I could be wrong though !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
May try and get a scrap piece of metal from mate and see if can fit it over standard over.
Also when fitting an induction kit do you have to loss the original cover??
I know it have filter in standard but was thinking just taking it off, cutting pipe to t/b off then hole in top for pipe to come out.
garyskisplym
09-03-2018, 06:20 PM #15See at the min need to keep mine as still got standard filter.
May try and get a scrap piece of metal from mate and see if can fit it over standard over.
Also when fitting an induction kit do you have to loss the original cover??
I know it have filter in standard but was thinking just taking it off, cutting pipe to t/b off then hole in top for pipe to come out.
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
yip matey it has to come off the cover is the air box and prob not a good idea to start drillin holes/cutting uo as it prob wont work...?
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
i did what bandit had done it easy to make you just have to make a template first i did mine in 1.5mm alloy sheet not as good as bandits with colour and all that but not bad for a first go
1 Guest(s)
1 Guest(s)
Views 422
Last Post by
Views 877
Last Post by
Views 346
Last Post by