Project IS200 Polished Rocker Cover :-)
Project IS200 Polished Rocker Cover :-)
15-03-2018, 04:41 PM
Quote:I have bought a spare oil filter bracket and Thermostat housing for the buggy Chris so i can polish them up then swap them on my engine. Your more than welcome to the standard parts mate after i put the polished parts on. Then you have some parts to sell to the Starlet guys........
Thanks matey, going to see if i can get hold of an IS200 alternator next, and been trying to get hold of a few sets of is200/300 rad brackets, but all the breakers i've spoken to say there sold out??? (more like they can't be bothered due to low cost:Shooting
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Quote:I have bought a spare oil filter bracket and Thermostat housing for the buggy Chris so i can polish them up then swap them on my engine. Your more than welcome to the standard parts mate after i put the polished parts on. Then you have some parts to sell to the Starlet guys........
Thanks matey, going to see if i can get hold of an IS200 alternator next, and been trying to get hold of a few sets of is200/300 rad brackets, but all the breakers i've spoken to say there sold out??? (more like they can't be bothered due to low cost:Shooting
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
15-03-2018, 04:42 PM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-03-2018, 04:42 PM #52Ha ha, sold out of rad brackets, yeah right !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
15-03-2018, 04:43 PM
Moley Well that dose look great Chris ,but also looks like a lot of effort.
But I think it would go nice with my rad bracketsmoke:
Cheers matey
its not too bad to be honest mate, and its better now i have a sisal cutting wheel and some harder cutting paste :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Moley Well that dose look great Chris ,but also looks like a lot of effort.
But I think it would go nice with my rad brackets
Cheers matey
its not too bad to be honest mate, and its better now i have a sisal cutting wheel and some harder cutting paste :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
15-03-2018, 04:45 PM
steviewevie Ha ha, sold out of rad brackets, yeah right !
That's exactly what i said mate, they just cant be bothered to take them off, i even asked one chap if he had 10 sets, so at least it would be worth the effort, but no he'd sold out too :Shooting::Chair:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
steviewevie Ha ha, sold out of rad brackets, yeah right !
That's exactly what i said mate, they just cant be bothered to take them off, i even asked one chap if he had 10 sets, so at least it would be worth the effort, but no he'd sold out too :Shooting::Chair:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
15-03-2018, 04:55 PM
40mm Lowering Springs, Re-sprayed Front, 6000K HID's, Re-furbed alloys, Bandit Induction Kit (cheers Chris), Raised boot spoiler with LED, Blue calipers with silver decals, De-badged rear, Chrome Oil Filler Cap (thanks to Chris again), White LED dash bulbs, Blue a/c control bulbs, Blue door markers and interior lights, Sony head unit, Chrome Lexus tax disc holder, TRD side skirts, Original Saloon Front Bumper re-fitted instead of Sportcross
![[Image: Lf9Nl.jpg]](http://i.imgur.com/Lf9Nl.jpg)
I've still got exhaust sections mate if they're any good to you:tongue_smilie:
40mm Lowering Springs, Re-sprayed Front, 6000K HID's, Re-furbed alloys, Bandit Induction Kit (cheers Chris), Raised boot spoiler with LED, Blue calipers with silver decals, De-badged rear, Chrome Oil Filler Cap (thanks to Chris again), White LED dash bulbs, Blue a/c control bulbs, Blue door markers and interior lights, Sony head unit, Chrome Lexus tax disc holder, TRD side skirts, Original Saloon Front Bumper re-fitted instead of Sportcross
15-03-2018, 05:02 PM
Andy-R. I've still got exhaust sections mate if they're any good to you:tongue_smilie:
Cheers matey, its a shame i couldn't get hold of a few tips to polish up? did think about having some made, or buying a length of stainless tube and cutting them and just having the ends rolled, but the cost of the tube was stupid
cared:cared: Think i should of brought another is200 mate, i could of used it then to measure bits up to make parts, like the bottle covers etc..?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Andy-R. I've still got exhaust sections mate if they're any good to you:tongue_smilie:
Cheers matey, its a shame i couldn't get hold of a few tips to polish up? did think about having some made, or buying a length of stainless tube and cutting them and just having the ends rolled, but the cost of the tube was stupid
cared:cared: Think i should of brought another is200 mate, i could of used it then to measure bits up to make parts, like the bottle covers etc..?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
15-03-2018, 06:09 PM
DaveEdin Would've thought you could just build one out of the infamous sheds Chris? :lol:
A-Team style...
:laugh: not got much left if anything for the IS200 now mate :Chair:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
DaveEdin Would've thought you could just build one out of the infamous sheds Chris? :lol:
A-Team style...
:laugh: not got much left if anything for the IS200 now mate :Chair:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 5
Views 1,385
Views 1,385
04-05-2020, 11:33 AM
Last Post byAlmost Finished
Last Post by
Replies 23
Views 3,765
Views 3,765
15-12-2017, 02:03 PM
Last Post byJames S
Last Post by