Possible tyre wear issue? Tony/WIM?
Possible tyre wear issue? Tony/WIM?
16-03-2018, 03:43 PM
![[Image: Scan10001.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Scan10001.jpg)
You will see that my rear camber is a bit out of range because the car has been lowered quite a lot there, but they didn't think these values should be a problem. But you can see the target for that, and for everything else too.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-03-2018, 03:43 PM #31Here is the printout from my visit :
You will see that my rear camber is a bit out of range because the car has been lowered quite a lot there, but they didn't think these values should be a problem. But you can see the target for that, and for everything else too.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
16-03-2018, 04:15 PM
the finish line is in sight!!!!well mibbi not....
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
thanks mate i will be running a bit of camber at the rear too coz i'm going for the vip look poss need to run a little at the front too...cant wait.....
the finish line is in sight!!!!well mibbi not....
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
16-03-2018, 05:57 PM
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
Do you have use of the Hunter Eye Machine (think thats what it's called) Ormi ?
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
16-03-2018, 06:17 PM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
no mate we just have a normal lazer machine but i do know a man who does...:wink:
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…