JapCarForum General Discussions The JCF Lounge Been stuck in virtual reality !

Been stuck in virtual reality !

Been stuck in virtual reality !

Saraj
Posting Freak
2,791
29-04-2018, 08:15 PM
#1
Im back !

Been busy over the last week,

My local mosque where I attend, have purchased a new building, and are currently refurbing it, but to raise funds via donations, I decided to make a virtual tour of the new proposed mosque to give people the idea.

And this what I have come up, the software was slow, even for my 4gb 2ghz, 512mb graphics, laptop. but got there at the end

what do you, not about the mosque, but the design itself, any recomend any other software?

I used turbofloorplan 3d

http://www.youtube.com/watch?v=PphSlVVr39g

[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
Saraj
29-04-2018, 08:15 PM #1

Im back !

Been busy over the last week,

My local mosque where I attend, have purchased a new building, and are currently refurbing it, but to raise funds via donations, I decided to make a virtual tour of the new proposed mosque to give people the idea.

And this what I have come up, the software was slow, even for my 4gb 2ghz, 512mb graphics, laptop. but got there at the end

what do you, not about the mosque, but the design itself, any recomend any other software?

I used turbofloorplan 3d

http://www.youtube.com/watch?v=PphSlVVr39g


[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]

parthiban
Posting Freak
4,925
30-04-2018, 06:43 AM
#2
That's really good! I've always wanted to have a play with CAD software as it seems like fun, was it hard to do?

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban
30-04-2018, 06:43 AM #2

That's really good! I've always wanted to have a play with CAD software as it seems like fun, was it hard to do?


2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

SHAHZ
Posting Freak
2,142
30-04-2018, 08:36 AM
#3
Good stuff ......the movement looked a bit like doom as you go up the stairs:laugh:

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
30-04-2018, 08:36 AM #3

Good stuff ......the movement looked a bit like doom as you go up the stairs:laugh:


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

FirebirdPhil
Posting Freak
7,101
30-04-2018, 08:48 AM
#4
Really impressed mate - the closest to the inside of a mosque I have ever been!!

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
30-04-2018, 08:48 AM #4

Really impressed mate - the closest to the inside of a mosque I have ever been!!


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Saraj
Posting Freak
2,791
30-04-2018, 10:20 AM
#5
parthiban That's really good! I've always wanted to have a play with CAD software as it seems like fun, was it hard to do?

the software I has never used before, and is very easy to use, but without experiance, I made alot of mistakes which were difficult to fix, but managed it,

i didnt have the exact sizes of the rooms and stuff, but you can do it properly, print 2d drawing, which artichects use

SHAHZ Good stuff ......the movement looked a bit like doom as you go up the stairs:laugh:

yh, couldnt get it perfect, that was the best i could do !

2tongues Really impressed mate - the closest to the inside of a mosque I have ever been!!

i was impressed myself, and the committee members of the mosque, where my dad is chairman were also, they just want buy tv now with built in memory card ready, and put it up in mosque.

[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
Saraj
30-04-2018, 10:20 AM #5

parthiban That's really good! I've always wanted to have a play with CAD software as it seems like fun, was it hard to do?

the software I has never used before, and is very easy to use, but without experiance, I made alot of mistakes which were difficult to fix, but managed it,

i didnt have the exact sizes of the rooms and stuff, but you can do it properly, print 2d drawing, which artichects use

SHAHZ Good stuff ......the movement looked a bit like doom as you go up the stairs:laugh:

yh, couldnt get it perfect, that was the best i could do !

2tongues Really impressed mate - the closest to the inside of a mosque I have ever been!!

i was impressed myself, and the committee members of the mosque, where my dad is chairman were also, they just want buy tv now with built in memory card ready, and put it up in mosque.


[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)