Engine oil level
Engine oil level
07-06-2017, 09:48 AM
Edited 19-07-2009, 07:45 PM by steviewevie.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-06-2017, 09:48 AM #2I doubt that will cause any problem. If you're concerned about it then you could use a syringe or try and siphon some out with a piece of tubing if you like.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
07-06-2017, 03:04 PM
just undo the oil plug in the sump, and take some out then just do it up once you are done....
Edited 19-07-2009, 06:52 PM by Marcus_1UZ.
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
07-06-2017, 03:04 PM #3Right haveing to much oil in the engine is just as bad to not haveing any oil or haveing oil to low
just undo the oil plug in the sump, and take some out then just do it up once you are done....
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
07-06-2017, 03:06 PM
Marcus_1UZ just undo the oil plug in the sump, and take some out then just do it up once you are done....
I was thinking that, but someone just PM'd me that Kwik Fit have a piece of kit they use to take some out from the top
I'll give it a go, if it dry's up tomorrow, cheers Marcus.
Marcus_1UZ just undo the oil plug in the sump, and take some out then just do it up once you are done....
I was thinking that, but someone just PM'd me that Kwik Fit have a piece of kit they use to take some out from the top
I'll give it a go, if it dry's up tomorrow, cheers Marcus.
07-06-2017, 07:22 PM
Lee I was thinking that, but someone just PM'd me that Kwik Fit have a piece of kit they use to take some out from the top
I'll give it a go, if it dry's up tomorrow, cheers Marcus.
HHHMMM please tell me how you are going to get oil out the top of the engine when the oil sit,s in the sump, you say that its 5mm over the max mark, the best way of geting oil out and it will take you 5min,s to do so is from the sump!!! for it to be over by 5mm you have about 1 or 2 lt,s more than you should have!!
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
07-06-2017, 07:22 PM #5Lee I was thinking that, but someone just PM'd me that Kwik Fit have a piece of kit they use to take some out from the top
I'll give it a go, if it dry's up tomorrow, cheers Marcus.
HHHMMM please tell me how you are going to get oil out the top of the engine when the oil sit,s in the sump, you say that its 5mm over the max mark, the best way of geting oil out and it will take you 5min,s to do so is from the sump!!! for it to be over by 5mm you have about 1 or 2 lt,s more than you should have!!
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
07-06-2017, 07:40 PM
Marcus_1UZ HHHMMM please tell me how you are going to get oil out the top of the engine when the oil sit,s in the sump, you say that its 5mm over the max mark, the best way of geting oil out and it will take you 5min,s to do so is from the sump!!! for it to be over by 5mm you have about 1 or 2 lt,s more than you should have!!
I was wondering the same tbh.
1 or 2 ltrs :o
Lexus filled it on the last service so just assumed it was right.
Looks like i'm going to get mucky tomorrow night
Marcus_1UZ HHHMMM please tell me how you are going to get oil out the top of the engine when the oil sit,s in the sump, you say that its 5mm over the max mark, the best way of geting oil out and it will take you 5min,s to do so is from the sump!!! for it to be over by 5mm you have about 1 or 2 lt,s more than you should have!!
I was wondering the same tbh.
1 or 2 ltrs :o
Lexus filled it on the last service so just assumed it was right.
Looks like i'm going to get mucky tomorrow night
07-06-2017, 08:12 PM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
remember though only check your oil when cold and on a level surface!!!!when its warmed up it will be higher up the dipstick.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
07-06-2017, 09:55 PM
ormi remember though only check your oil when cold and on a level surface!!!!when its warmed up it will be higher up the dipstick.
yea good point there:thumbup1:
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
07-06-2017, 09:55 PM #8ormi remember though only check your oil when cold and on a level surface!!!!when its warmed up it will be higher up the dipstick.
yea good point there:thumbup1:
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
07-06-2017, 09:59 PM
Lee I was wondering the same tbh.
1 or 2 ltrs :o
Lexus filled it on the last service so just assumed it was right.
Looks like i'm going to get mucky tomorrow night
no its not a mucky job mate, you will be ok, just get the sump nut 2 or 3 turn,s and the oil should start to come out ( what ever you do dont take the nut all the way out, or you will get mucky lol) then just do it back up when you got some oil out....
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
07-06-2017, 09:59 PM #9Lee I was wondering the same tbh.
1 or 2 ltrs :o
Lexus filled it on the last service so just assumed it was right.
Looks like i'm going to get mucky tomorrow night
no its not a mucky job mate, you will be ok, just get the sump nut 2 or 3 turn,s and the oil should start to come out ( what ever you do dont take the nut all the way out, or you will get mucky lol) then just do it back up when you got some oil out....
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
08-06-2017, 04:39 AM
great bit of kit and saves getting dirty CLICK ME! And it gets nearly all the oil out of the sump :thumbup1:
Edited 20-07-2009, 08:27 AM by Bandit.
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Lee you should of popped over to see my brother, he has one of the suction kits that kwik fit use and they take it out of the dip stick hole by sliding a pipe down it and then they pump it out using a vacuum pump, great bit of kit and saves getting dirty CLICK ME! And it gets nearly all the oil out of the sump :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 3
Views 353
Views 353
15-01-2023, 08:08 AM
Last Post byFOSSIL FUELS
Last Post by
Replies 9
Views 779
Views 779
17-08-2022, 09:38 AM
Last Post bymattlaw
Last Post by
Replies 1
Views 293
Views 293
10-03-2021, 05:19 AM
Last Post bymattlaw
Last Post by