Mechanical aptitude test............
Mechanical aptitude test............
Well I am sure it will come up sooner or later, afterall I am only 14, and I chose electronics for my GCSE in Technology so...


is very nice!
Pulleys not too likely to come up in Electronics 
On the plus side, I got all the cogs/gearing questions right - good job too, logic fairly important in my job 
@Ian - I have indeed, and must note that I have actually shown a greater interest in Parent's Night since my son got into P2... :wink: Miss Mackay (not her real name :biggrin
is very nice!
DaveEdin On the plus side, I got all the cogs/gearing questions right - good job too, logic fairly important in my job

DaveEdin On the plus side, I got all the cogs/gearing questions right - good job too, logic fairly important in my job

Yes, but you said cogs still.
A'l boot yer hoop Dave ya wee laddie!
Boonce a tumbler off yer heed!!!
Sparkystav I can see what you mean about it
Sparkystav I can see what you mean about it
DaveEdin They were called cogs when I was at school, junior...
And do note the use of the term "cogs/gearing" (you even quoted it) which I believe demonstrates I am aware of the terminology in use.
Defence rests m'lud.
DaveEdin They were called cogs when I was at school, junior...
And do note the use of the term "cogs/gearing" (you even quoted it) which I believe demonstrates I am aware of the terminology in use.
Defence rests m'lud.
Will stick with my plan of buying beer for the more mechanically minded :lol:
What you got against the word "cog" anyway Oli? Seems an awfully odd thing to try and one-up me over, seeing as I used both the term I'm familiar with and the "correct" one... heh must do better with witty retorts, Oli!