Bandit's Supercharged IS200 take 2 :-)
Bandit's Supercharged IS200 take 2 :-)
27-06-2018, 10:08 PM
Then make rad covers aswell if you want??
Dark Samurai
27-06-2018, 10:08 PM #101Looks good mate, get the Power steering cover made, the brake fluid bottle made, whatever other bottles made and then make a group buy, you are bound to have customers!
Then make rad covers aswell if you want??
29-06-2018, 11:07 AM
![[Image: NewPASbottlecoverfitted1.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/My%20Lexus%20Supercharged%20Lexus%20IS200/NewPASbottlecoverfitted1.jpg)
![[Image: NewPASbottlecoverfitted2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/My%20Lexus%20Supercharged%20Lexus%20IS200/NewPASbottlecoverfitted2.jpg)
Made it out of polished aluminium, but might have to buy some stainless as i think the finish would be better?? the aluminium is very easy to work with though :biggrin:
:thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Made and fitted the power steering bottle cover today....
Made it out of polished aluminium, but might have to buy some stainless as i think the finish would be better?? the aluminium is very easy to work with though :biggrin:
:thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Dark Samurai
29-06-2018, 11:13 AM #105Well, you should have it all done by JAE, then you can show off your car.
29-06-2018, 11:27 AM
DaveEdin Looks great Chris...
What's involved in making them, is there a lot of effort required? :wink: If you decide you don't like the style of it and go with stainless steel instead I'll buy this one off ya :thumbup:
Not too hard to make mate, just need to make a model of it out of card board first then copy it onto a sheet of metal, cut it out and put it together then fit it on the car
dimis Looks good mate. I also see in the pics that you have copied my induction kit design :wink:
Funny that mate, when i was looking at your car pic's the other day, i saw your induction kit and thought mine looks like the one you made :thumbup: a lot cheaper to make than to buy it off the shelf too :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
DaveEdin Looks great Chris...
What's involved in making them, is there a lot of effort required? :wink: If you decide you don't like the style of it and go with stainless steel instead I'll buy this one off ya :thumbup:
Not too hard to make mate, just need to make a model of it out of card board first then copy it onto a sheet of metal, cut it out and put it together then fit it on the car
dimis Looks good mate. I also see in the pics that you have copied my induction kit design :wink:
Funny that mate, when i was looking at your car pic's the other day, i saw your induction kit and thought mine looks like the one you made :thumbup: a lot cheaper to make than to buy it off the shelf too :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
29-06-2018, 11:59 AM
moke:
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
As always, top work matemoke:
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 1,312
Views 132,046
Views 132,046
25-03-2025, 07:58 AM
Last Post byZAIS200
Last Post by
Replies 1,341
Views 97,629
Views 97,629
07-02-2025, 07:41 AM
Last Post byWayne
Last Post by
Replies 4
Views 804
Views 804
17-12-2024, 08:44 AM
Last Post byRabster
Last Post by
Replies 20
Views 2,391
Views 2,391
07-10-2024, 09:48 AM
Last Post byWayne
Last Post by
Replies 42
Views 4,556
Views 4,556
03-10-2024, 09:41 PM
Last Post byWayne
Last Post by
Replies 28
Views 3,209
Views 3,209
16-05-2024, 05:14 PM
Last Post byIS200_rider
Last Post by