New Wheel Nuts
New Wheel Nuts
I'm contemplating getting some new ones for my IS200. I realise there are lots on eBay but wonder how long some of them stay in good condition, e.g. if they go rusty after a couple of months.
I also realise I need to get the right type of nuts, e.g. the right sort of seating etc.
Any experience/recommendations ?
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
12-05-2017, 05:44 AM #1Can anyone recommend a specific place that sells decent wheel nuts ?
I'm contemplating getting some new ones for my IS200. I realise there are lots on eBay but wonder how long some of them stay in good condition, e.g. if they go rusty after a couple of months.
I also realise I need to get the right type of nuts, e.g. the right sort of seating etc.
Any experience/recommendations ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
You can get the adonized type Steve, that keep the colour pretty well or you could get the tuner nuts but think there a bit thin and will sick out a bit too much for the wheels you have, think if it was me i'd try and find a set of black toyota nuts with the flat mounting face and think they will match the outer rim studs pretty well
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
![[Image: 1211_1.JPG]](http://i22.ebayimg.com/05/i/000/8c/1f/1211_1.JPG)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
12-05-2017, 08:25 AM #3Thanks, I was looking at the wheel nuts on eBay earlier, and I did spot these ones.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
One question about the coloured nuts though, for those who have used them. Does the colour come off easily ? i.e. do you need to use a socket with a rubberised insert to protect them (and get garages to use that etc) or are they pretty tough in general ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
13-05-2017, 08:02 AM #4The thread is M12x1.5, and the OEM nuts have a flat seat. I think this is a standard Toyota fitment.
One question about the coloured nuts though, for those who have used them. Does the colour come off easily ? i.e. do you need to use a socket with a rubberised insert to protect them (and get garages to use that etc) or are they pretty tough in general ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
I bought Chris's wheels from his old car (thanks Chris !). I'm going to get them refurbed (via WIM) and get some new tyres on them, but I can't wait to get them on my car !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
14-05-2017, 01:23 PM #5The reason I'm after some new wheel nuts is - wait for it - I've finally got some TTE Chicane wheels ! Woo-hoo, I'm very excited, been after some for a while but was thinking I'd never find any !
I bought Chris's wheels from his old car (thanks Chris !). I'm going to get them refurbed (via WIM) and get some new tyres on them, but I can't wait to get them on my car !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Any joy with wheel nuts? I am looking for new coned seat set (M12 x 1.5) for my OZ wheels, I think I am going to for Mcgard ones - they are little expensive though.
alamkhan3980
14-05-2017, 01:27 PM #6That is great news Steve!
Any joy with wheel nuts? I am looking for new coned seat set (M12 x 1.5) for my OZ wheels, I think I am going to for Mcgard ones - they are little expensive though.
But now I've found out from TTE that I shouldn't be using the OEM wheel nuts with them, they recommended a tapered seat instead of the OEM flat-seated nuts. So I'll have to buy a new set of nuts anyway.
I saw the McGard wheel nuts and they look good, though as you say expensive. I've also been recommended the Dura nuts, which come in different colours and I think have a cone seat too. But they're expensive as well.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
14-05-2017, 01:43 PM #7I'm still thinking about the wheel nuts. When I was thinking about the black ones, I realised that my existing McGard locking nuts (silver) wouldn't look right with them.
But now I've found out from TTE that I shouldn't be using the OEM wheel nuts with them, they recommended a tapered seat instead of the OEM flat-seated nuts. So I'll have to buy a new set of nuts anyway.
I saw the McGard wheel nuts and they look good, though as you say expensive. I've also been recommended the Dura nuts, which come in different colours and I think have a cone seat too. But they're expensive as well.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
http://www.nengun.com
Got the - 5zigen - Racing Nut
20 x M12-P1.5 (19Hex) - includes 4 Locks
Very light & good quality. Now got them on the Mazda, starting to show signs of the anodising coming of at the edges but had the wheels of & on on the Lex a good few times. Could not belive how light these were compared to the standard Lexus nuts.
Pricy though cost £100 from Japan.
Cheers
Bobby
Shy boys don't get sweeties.
I bought a set from
http://www.nengun.com
Got the - 5zigen - Racing Nut
20 x M12-P1.5 (19Hex) - includes 4 Locks
Very light & good quality. Now got them on the Mazda, starting to show signs of the anodising coming of at the edges but had the wheels of & on on the Lex a good few times. Could not belive how light these were compared to the standard Lexus nuts.
Pricy though cost £100 from Japan.
Cheers
Bobby
Shy boys don't get sweeties.
DJ Wozza Offtopic
Bobby you need to change your signature to
"Everyone can now have an opinion, but I don't have too agree with them all"
Wozza when I put that on it was a bit tongue in cheek after what had happened to "others" elsewhere :LOCMOD: :wink:
Cheers
Bobby
Shy boys don't get sweeties.
DJ Wozza Offtopic
Bobby you need to change your signature to
"Everyone can now have an opinion, but I don't have too agree with them all"
Wozza when I put that on it was a bit tongue in cheek after what had happened to "others" elsewhere :LOCMOD: :wink:
Cheers
Bobby
Shy boys don't get sweeties.
1 Guest(s)
1 Guest(s)
Views 417
Last Post by
Views 1,697
Last Post by
Views 647
Last Post by
Views 664
Last Post by
Views 862
Last Post by
Views 902
Last Post by
Views 1,387
Last Post by