JapCarForum Cars, Cars, Cars! Garage or supplier Reviews Brands Hatch Performance

Brands Hatch Performance

Brands Hatch Performance

Sparkystav
Administrator
14,683
10-09-2024, 01:21 AM
#1
I recently earnt a bit of overtime so decided to splash out on something id been tempting myself with for quite a while. A new ECU.

There was absolutely nothing wrong with my old ecu and it did a fine job on my car but i wanted the newer version and more channels for finer control; plus some other settings.

I was settled therefore on the Link G4+ Fury ecu. A newer 6 channel version of my old G4 Storm that has onboard Wideband, Knock, drive by wire, traction control, cruise control, and the usual Link motorsport features like launch and anti lag.

After asking a few suppliers about what i needed Clint from BHP was the most friendly and willing to answer my many questions prior, during, and post the sale of the ecu.

They also stock a huge range of plugs and connectors that have allowed me to completely rebuild the engine loom without the need for soldered connections. This should benefit me in terms of reliable signals and control.

He even found and got into stock connectors he didnt have that i asked about (subaru coil on plug for reference)

Overall well recommended!


http://www.shopbhp.com/
Edited 22-10-2016, 05:07 AM by Sparkystav.

OutlawJapClub Admin Team
Sparkystav
10-09-2024, 01:21 AM #1

I recently earnt a bit of overtime so decided to splash out on something id been tempting myself with for quite a while. A new ECU.

There was absolutely nothing wrong with my old ecu and it did a fine job on my car but i wanted the newer version and more channels for finer control; plus some other settings.

I was settled therefore on the Link G4+ Fury ecu. A newer 6 channel version of my old G4 Storm that has onboard Wideband, Knock, drive by wire, traction control, cruise control, and the usual Link motorsport features like launch and anti lag.

After asking a few suppliers about what i needed Clint from BHP was the most friendly and willing to answer my many questions prior, during, and post the sale of the ecu.

They also stock a huge range of plugs and connectors that have allowed me to completely rebuild the engine loom without the need for soldered connections. This should benefit me in terms of reliable signals and control.

He even found and got into stock connectors he didnt have that i asked about (subaru coil on plug for reference)

Overall well recommended!


http://www.shopbhp.com/


OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator
1,674
10-09-2024, 04:17 AM
#2
ill be looking into this may be time to change ecu with the new setup.

OutlawJapClub Admin Team
Jimbob-T-Lex
10-09-2024, 04:17 AM #2

ill be looking into this may be time to change ecu with the new setup.


OutlawJapClub Admin Team

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)