JapCarForum Cars, Cars, Cars! Help Topics - Submit Your Help For Other Members! supercharger help.

supercharger help.

supercharger help.

Pages (2): Previous 1 2
daveo
Member
71
06-02-2022, 08:00 PM
#11
do you have a number for him by any chance?? what pully are you using , are you up and running
daveo
06-02-2022, 08:00 PM #11

do you have a number for him by any chance?? what pully are you using , are you up and running

deccie22
Junior Member
32
06-02-2022, 08:03 PM
#12
no dont man but he does be on tezza world and toc-irl a good bit. using a w/p pulley off a slk merc. no not yet waiting on a few bits!
deccie22
06-02-2022, 08:03 PM #12

no dont man but he does be on tezza world and toc-irl a good bit. using a w/p pulley off a slk merc. no not yet waiting on a few bits!

Lance79
Member
77
14-02-2022, 06:06 PM
#13
daveo can someone please help here explain a few things. the car is nearly ready for remapping. have supercharger mounted and hardpiped. i did not put anything on the bypass valve as i was thinking i could run without it.....can i run without it or am i better to install one. the cable off of the valve is broken but the spring is ok. do i have to replace this cord?? the car is drift spec .i am using a patrick black box. will this be ok with a 160mm pulley.?? any help greatly appreciated as im at a standstill at the moment.

You cannot remap an IS200 unless you have a standalone management system. The factory ECU will wipe any changes.

You don't need a bypass if you've a BOV. If you are going for a BOV you need a 1st generation HKS SSQV as they are the only ones that are adjustable which you need as the boost pressure of a supercharger is considerably lower than a turbo which they are more commonly used. You will need either a bypass or a BOV or else you'll get compressor surge and belt slip.

This is where i have my BOV mounted.

[Image: gallery_5086_212_264286.jpg]
Lance79
14-02-2022, 06:06 PM #13

daveo can someone please help here explain a few things. the car is nearly ready for remapping. have supercharger mounted and hardpiped. i did not put anything on the bypass valve as i was thinking i could run without it.....can i run without it or am i better to install one. the cable off of the valve is broken but the spring is ok. do i have to replace this cord?? the car is drift spec .i am using a patrick black box. will this be ok with a 160mm pulley.?? any help greatly appreciated as im at a standstill at the moment.

You cannot remap an IS200 unless you have a standalone management system. The factory ECU will wipe any changes.

You don't need a bypass if you've a BOV. If you are going for a BOV you need a 1st generation HKS SSQV as they are the only ones that are adjustable which you need as the boost pressure of a supercharger is considerably lower than a turbo which they are more commonly used. You will need either a bypass or a BOV or else you'll get compressor surge and belt slip.

This is where i have my BOV mounted.

[Image: gallery_5086_212_264286.jpg]

beamstezza
Member
155
14-02-2022, 07:56 PM
#14
Any good quality bov will be adjustable and you can get bov for low boost setups as well.
beamstezza
14-02-2022, 07:56 PM #14

Any good quality bov will be adjustable and you can get bov for low boost setups as well.

daveo
Member
71
07-04-2022, 10:12 AM
#15
Lance79 You cannot remap an IS200 unless you have a standalone management system. The factory ECU will wipe any changes.

You don't need a bypass if you've a BOV. If you are going for a BOV you need a 1st generation HKS SSQV as they are the only ones that are adjustable which you need as the boost pressure of a supercharger is considerably lower than a turbo which they are more commonly used. You will need either a bypass or a BOV or else you'll get compressor surge and belt slip.

This is where i have my BOV mounted.

[Image: gallery_5086_212_264286.jpg]


so you have a bov and a bypass?? do you see my other thread........do you think this might sort my problem ??
daveo
07-04-2022, 10:12 AM #15

Lance79 You cannot remap an IS200 unless you have a standalone management system. The factory ECU will wipe any changes.

You don't need a bypass if you've a BOV. If you are going for a BOV you need a 1st generation HKS SSQV as they are the only ones that are adjustable which you need as the boost pressure of a supercharger is considerably lower than a turbo which they are more commonly used. You will need either a bypass or a BOV or else you'll get compressor surge and belt slip.

This is where i have my BOV mounted.

[Image: gallery_5086_212_264286.jpg]


so you have a bov and a bypass?? do you see my other thread........do you think this might sort my problem ??

Pages (2): Previous 1 2
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 209
Views 26,574
06-04-2025, 11:17 PM
Last Post by lexus971
Replies 15
Views 1,748
21-03-2025, 10:24 PM
Last Post by Wayne
Replies 8
Views 1,196
29-08-2021, 03:50 PM
Last Post by FirebirdPhil
Replies 10
Views 1,191
11-09-2020, 06:20 PM
Last Post by Sparkystav
Replies 4
Views 987
09-06-2020, 03:51 PM
Last Post by FirebirdPhil