Beeping noise when unlocking is200

Davros
Member

127

03-02-2018, 07:50 PM

#21

Hello mate,

I have only just seen this thread, and I know I how to help. I also kinda had the same problem as you, with a dead battery.

I was going to make a my own post soon with all the work i have done to my car. But seeing as you need help, I will tell you what I did now.

First of all, don’t worry, your car alarm will still work. The alarm is made up of two parts. A siren in the boot, and your car horn. So even if one of these doesn’t work, the other will. Unless both of them break…then you might have a problem.

Anyway the alarm siren has a battery pack in it, however Maplin will not have the right size or capacity wattage combination needed. So you will have to make your own battery pack. If you know how you use a soldering iron, this is dead easy to do.

http://uk.rs-online.com/web/0199652.html

That link is the exact battery you need They have tags on the terminals, which means you can join them together and connect them to the circuit board easily.
However you need to order 6 of them to make up the replacement pack.

Have a look at the OEM battery pack, and copy the way it is set up, and link the batteries together. Reattach the batteries back onto the circut board, and that should cure the problem.

Once you have reconnect the siren to the car, you will need to leave it for about 10-15 mins as the batteries will need to recharge themselves. After that you can test the siren, and it should work again.

[Image: Image074.jpg]

This was the problem with my alarm. My OEM batteries died, leaked all over the circt board, and killed it.

[Image: Image075-1.jpg]

After A LOT of cleaning and fixing, the circut board was actually still good

It's not pictured, but this is the side you need to mount your new battery pack, and it it just a normal connector.

[Image: Image077.jpg]

My own battery pack all made up, and connceted to the circut.

[Image: Image076.jpg]

The final finished version, and works like a brand new unit ! :thumbup1:

[Image: Image079.jpg]

Hope this helps in some way,and if you need to ask any questions, feel free to ask !!!

Edited 17-03-2010, 11:43 PM by Davros.

is300_dino
Posting Freak

3,556

03-02-2018, 08:03 PM

#22

good work davros

wozza... you beat me to it

Edited 17-03-2010, 11:51 PM by is300_dino.

Davros
Member

127

03-02-2018, 08:30 PM

#23

Cheers guys,

I have been meaning to do a little write up of all the little things I have worked on, on the car, but I’m still kind of doing stuff, and will report back soon

:laugh:

steviewevie
Posting Freak

7,993

04-02-2018, 04:55 AM

#24

Nice one Dave, very useful info ! :thumbup:

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

is300_dino
Posting Freak

3,556

04-02-2018, 05:32 AM

#25

possible pin thread or workshop??? could come in handy for others in future.

Recently Browsing
1 Guest(s)