JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Head Gasket Help! - Pics needed!

Head Gasket Help! - Pics needed!

Head Gasket Help! - Pics needed!

Pages (2): 1 2 Next
Sparkystav
Administrator
14,683
19-04-2020, 05:34 AM
#1
Right as my parts "overnight from Japan" have been delayed till the 12th im desperately trying to figure out how to get the car back on the road.

Water gaskets i can make, manifold gaskets im ok for as well.

Valve stems are ok as their the same as the 3SGTE, Cam shaft seals are the same as the Yeris oddly so thats ok.

the only part i need is a headgasket.

Now in my head it cant be any different to the 1GFE IS200 one as its the same block in principle, but has anybody got a picture of, or can take one of the 1gfe headgasket so i can compare.

need it asap

thanks.

OutlawJapClub Admin Team
Sparkystav
19-04-2020, 05:34 AM #1

Right as my parts "overnight from Japan" have been delayed till the 12th im desperately trying to figure out how to get the car back on the road.

Water gaskets i can make, manifold gaskets im ok for as well.

Valve stems are ok as their the same as the 3SGTE, Cam shaft seals are the same as the Yeris oddly so thats ok.

the only part i need is a headgasket.

Now in my head it cant be any different to the 1GFE IS200 one as its the same block in principle, but has anybody got a picture of, or can take one of the 1gfe headgasket so i can compare.

need it asap

thanks.


OutlawJapClub Admin Team

Dan_Turism0
Posting Freak
2,825
19-04-2020, 07:25 AM
#2
different part numbers on toyo-diy i'm afraid mate

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
19-04-2020, 07:25 AM #2

different part numbers on toyo-diy i'm afraid mate


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

Sparkystav
Administrator
14,683
19-04-2020, 07:34 AM
#3
yeah ive looked at that, but i cant see their actually being a difference between them.

ive googled it but you dont know if their a generic pic or not

OutlawJapClub Admin Team
Sparkystav
19-04-2020, 07:34 AM #3

yeah ive looked at that, but i cant see their actually being a difference between them.

ive googled it but you dont know if their a generic pic or not


OutlawJapClub Admin Team

Dan_Turism0
Posting Freak
2,825
19-04-2020, 07:39 AM
#4
i may be wrong here but just a guess and going by the 2JZ HG's which i know aren't the same for GE and GTE as the GTE is a lot thicker to lower compression.

Possible that this is the same for the FE and GTE maybe?

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
19-04-2020, 07:39 AM #4

i may be wrong here but just a guess and going by the 2JZ HG's which i know aren't the same for GE and GTE as the GTE is a lot thicker to lower compression.

Possible that this is the same for the FE and GTE maybe?


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

toxo
Posting Freak
4,843
19-04-2020, 09:58 AM
#5
The HG isn't thicker to lower compression - thicker head gaskets are a pikey way of lowering compression aftermarket. It's thicker because it's metal not paper due to much higher combustion compression due to boost.

I'm not sure your 'same block' approach works Stav, in theory the 1UZ is always the 'same block' but the HG is quite different between revisions. Different oilways for VVTi actuation and sometimes different coolant paths.

You might just have to wait it out Sad
Edited 31-05-2012, 01:45 PM by toxo.
toxo
19-04-2020, 09:58 AM #5

The HG isn't thicker to lower compression - thicker head gaskets are a pikey way of lowering compression aftermarket. It's thicker because it's metal not paper due to much higher combustion compression due to boost.

I'm not sure your 'same block' approach works Stav, in theory the 1UZ is always the 'same block' but the HG is quite different between revisions. Different oilways for VVTi actuation and sometimes different coolant paths.

You might just have to wait it out Sad

Sparkystav
Administrator
14,683
19-04-2020, 12:31 PM
#6
Ay I may have to. Got one on order but be good if I can get sorted quicker.

OutlawJapClub Admin Team
Sparkystav
19-04-2020, 12:31 PM #6

Ay I may have to. Got one on order but be good if I can get sorted quicker.


OutlawJapClub Admin Team

Sparkystav
Administrator
14,683
19-04-2020, 12:32 PM
#7
Wonder what Dave almost finished uses?

OutlawJapClub Admin Team
Sparkystav
19-04-2020, 12:32 PM #7

Wonder what Dave almost finished uses?


OutlawJapClub Admin Team

toxo
Posting Freak
4,843
19-04-2020, 01:39 PM
#8
My Toyota guy is saying ETA of the 9th if he orders the HG today. That plus time to get it to you probably works out the same!
toxo
19-04-2020, 01:39 PM #8

My Toyota guy is saying ETA of the 9th if he orders the HG today. That plus time to get it to you probably works out the same!

Sparkystav
Administrator
14,683
19-04-2020, 02:10 PM
#9
Nevermind. Thanks for asking.

OutlawJapClub Admin Team
Sparkystav
19-04-2020, 02:10 PM #9

Nevermind. Thanks for asking.


OutlawJapClub Admin Team

LEX11S
Senior Member
287
02-05-2020, 11:05 AM
#10
daves car stav uses the std headgasket as far as i know thats what ive used

Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
LEX11S
02-05-2020, 11:05 AM #10

daves car stav uses the std headgasket as far as i know thats what ive used


Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.

Pages (2): 1 2 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 4
Views 327
16-09-2021, 02:09 PM
Last Post by Rabster
Replies 17
Views 851
02-04-2021, 05:54 PM
Last Post by is300_dino
Replies 0
Views 227
27-03-2021, 11:22 AM
Last Post by ozzie b
Replies 6
Views 315
15-01-2021, 06:40 PM
Last Post by James S
Replies 6
Views 311
02-12-2020, 08:47 AM
Last Post by Sparkystav
Replies 3
Views 303
30-11-2020, 11:10 AM
Last Post by el_bandido
Replies 5
Views 400
16-11-2020, 03:10 PM
Last Post by jomo
Replies 35
Views 1,641
01-11-2020, 06:00 PM
Last Post by Sparkystav
Replies 4
Views 373
27-06-2020, 06:21 AM
Last Post by parthiban