[IS200] What would you need for a reliable, safe, 220/225hp?
[IS200] What would you need for a reliable, safe, 220/225hp?
10-07-2020, 11:19 AM
Matt_C I must admit, I thought about the Altezza, but much prefer the smoothness of the 6 pot IS lump, and all the other gubbins in the car. Hmm, so either switch up to the 300, or chuck WAY too much money into the engine bay of the 200 I guess...Also, a 6 pot engine sounds nicer than a 4 pot, unless the 4 pot is a boxer engine of course.
Edited 21-08-2012, 03:05 PM by P.Lindblom.
P.Lindblom
10-07-2020, 11:19 AM #11Matt_C I must admit, I thought about the Altezza, but much prefer the smoothness of the 6 pot IS lump, and all the other gubbins in the car. Hmm, so either switch up to the 300, or chuck WAY too much money into the engine bay of the 200 I guess...Also, a 6 pot engine sounds nicer than a 4 pot, unless the 4 pot is a boxer engine of course.
10-07-2020, 11:35 AM
el_bandido
10-07-2020, 11:35 AM #12IS300 + v160 gearbox is similar money to a properly supercharged IS200. Better, similar horsepower.
10-07-2020, 02:18 PM
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
10-07-2020, 02:18 PM #14getrag v160 is the manual 6 speed box from a tt supra
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
10-07-2020, 02:39 PM
Matt_C I must admit, I thought about the Altezza, but much prefer the smoothness of the 6 pot IS lump, and all the other gubbins in the car. Hmm, so either switch up to the 300, or chuck WAY too much money into the engine bay of the 200 I guess...
The Altezza is a smooth engine I bet you wouldn't be able to tell the difference in everyday driving. Just don't get the auto box version they are seriously slow beasts.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
10-07-2020, 02:39 PM #15Matt_C I must admit, I thought about the Altezza, but much prefer the smoothness of the 6 pot IS lump, and all the other gubbins in the car. Hmm, so either switch up to the 300, or chuck WAY too much money into the engine bay of the 200 I guess...
The Altezza is a smooth engine I bet you wouldn't be able to tell the difference in everyday driving. Just don't get the auto box version they are seriously slow beasts.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
10-07-2020, 02:44 PM
is300_dino getrag v160 is the manual 6 speed box from a tt supra
Ah, gotcha. Seeing as they are both 2JZ's, I presume (possibly wrongly!) it's a simple swap?
FirebirdPhil The Altezza is a smooth engine I bet you wouldn't be able to tell the difference in everyday driving. Just don't get the auto box version they are seriously slow beasts.
To be fair, I never test drove an Altezza; I'm just going on what I've read in reviews and on the net. I know I instantly fell in love with the smoothness of the I6 in the IS, along with it's quiet and understated, yet lovely burble
is300_dino getrag v160 is the manual 6 speed box from a tt supra
Ah, gotcha. Seeing as they are both 2JZ's, I presume (possibly wrongly!) it's a simple swap?
FirebirdPhil The Altezza is a smooth engine I bet you wouldn't be able to tell the difference in everyday driving. Just don't get the auto box version they are seriously slow beasts.
To be fair, I never test drove an Altezza; I'm just going on what I've read in reviews and on the net. I know I instantly fell in love with the smoothness of the I6 in the IS, along with it's quiet and understated, yet lovely burble
10-07-2020, 03:36 PM
Matt_C Ah, gotcha. Seeing as they are both 2JZ's, I presume (possibly wrongly!) it's a simple swap
a bit of moding is needed as the shifter holder needs shortening a little and you need to install the clutch peddle etc, and wouldl need a standalone ecu too, simple on paper expensive in reality lol, second hand v160 are around 3k, and around 6.5k brand new thats just for the box
hock: theres a fair few americans that have done it but they have all the manual setup there alreadyad:
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
10-07-2020, 03:36 PM #17Matt_C Ah, gotcha. Seeing as they are both 2JZ's, I presume (possibly wrongly!) it's a simple swap
a bit of moding is needed as the shifter holder needs shortening a little and you need to install the clutch peddle etc, and wouldl need a standalone ecu too, simple on paper expensive in reality lol, second hand v160 are around 3k, and around 6.5k brand new thats just for the box
hock: theres a fair few americans that have done it but they have all the manual setup there alreadyad:
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
10-07-2020, 03:36 PM
Matt_C Ah, gotcha. Seeing as they are both 2JZ's, I presume (possibly wrongly!) it's a simple swap?
It fits in the IS300 transmission tunnel without modification, you will need to get a prop fabricated and trick the ECU into thinking it's in drive.
el_bandido
10-07-2020, 03:36 PM #18Matt_C Ah, gotcha. Seeing as they are both 2JZ's, I presume (possibly wrongly!) it's a simple swap?
It fits in the IS300 transmission tunnel without modification, you will need to get a prop fabricated and trick the ECU into thinking it's in drive.
10-07-2020, 04:28 PM
el_bandido It fits in the IS300 transmission tunnel without modification, you will need to get a prop fabricated and trick the ECU into thinking it's in drive.
apparently propshafts from toyota sequiola's are a direct fit for the v160 and is300, saves on fabricating one up but with import costs probably not much between the prices
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
10-07-2020, 04:28 PM #20el_bandido It fits in the IS300 transmission tunnel without modification, you will need to get a prop fabricated and trick the ECU into thinking it's in drive.
apparently propshafts from toyota sequiola's are a direct fit for the v160 and is300, saves on fabricating one up but with import costs probably not much between the prices
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 21
Views 2,016
Views 2,016
04-07-2024, 10:57 AM
Last Post bydamtrx
Last Post by
Replies 1
Views 639
Views 639
23-05-2024, 11:49 AM
Last Post byis200turbo
Last Post by
Replies 1
Views 892
Views 892
16-04-2024, 09:39 AM
Last Post bySparkystav
Last Post by
Replies 9
Views 1,603
Views 1,603
04-04-2024, 09:07 AM
Last Post bydamtrx
Last Post by
Replies 6
Views 1,077
Views 1,077
29-02-2024, 07:39 PM
Last Post byTheDieselDoctor
Last Post by
Replies 2
Views 452
Views 452
30-04-2023, 12:16 PM
Last Post bySparkystav
Last Post by
Replies 8
Views 702
Views 702
27-04-2023, 06:34 PM
Last Post byoedipus
Last Post by
Replies 5
Views 462
Views 462
01-05-2022, 06:05 AM
Last Post byel_bandido
Last Post by