help me finish it.....turbo help
help me finish it.....turbo help
yer i know. want to get one of those things you sent me the drawing to. way above my level i think?
i just get lots of info but it all seems a bit mixed.
![[Image: Untitled-2.jpg]](http://i915.photobucket.com/albums/ac351/jay_russell_71/Untitled-2.jpg)
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
![[Image: Untitled-2.jpg]](http://i915.photobucket.com/albums/ac351/jay_russell_71/Untitled-2.jpg)
This picture looks right, but i'm unsure of what the two pipes on the side of the engine your on about, can you take an actual picture?
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
these are the header pipes i think. one in and one out that used to connect to the oem air filter, i dont have a fuel return pipe fitted yet, also there are to fittings on the wastegate. one in the middle and one on the edge, mine has only 2 not 3 so forget the one on the side
http://i48.photobucket.com/albums/f206/w...egate6.jpg
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
The bottom one is the oil breather so either put it to a catch can or just put a filter on it.
i assume the other is from the inlet so needs to supply the boost signal to everything
You can set wastegates up various ways, google it for more advice, have a nosey at these instructions from the turbosmart one: http://www.turbosmartonline.com/index.ph...oad&id=203
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
well got the car started today but still have the last bits to finish of before i go on holiday in 2 weeks. nice to hear it start up and run.