Bonnet Support Clip Panel
Bonnet Support Clip Panel
![[Image: MySig.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/MySig.jpg)
Say £6 delivered if i have it?
Jason
I know the one...... pretty sure i have it. Can get it off the car tomorrow and then sent out Tuesday if thats any good? Would send monday but its a bank holiday lol
Say £6 delivered if i have it?
Jason
:Bazza:Well with today being sunday i spent time tinkering in my garage, tided the place up a bit and sorted out a stereo that i had kicking about for some background music.
So with the garage sorted i turned my hands to the is, got the car in sept last year and about 2 months later the bonet stay snapped on me!
So i just used a bit of hose clipage thing to do till i got a new one, £15 F that!
After looking around my garage for a few hours i came across some clips i bought for something?? and thought they my do the job.....
![[Image: DSC02565.JPG]](https://enal2w.bay.livefilestore.com/y1p2sNefw_BlHUJuQvXkbOwPqeqgdHGZR3wK8Lo9IIZDVgPovqnlY26NmVF6sCCCi_9_oSiGCUxLodtTH5RRA-FuQ/DSC02565.JPG)
Just cut away half
![[Image: DSC02563.JPG]](https://enal2w.bay.livefilestore.com/y1p3HpKfQKMn83NIAuo3Cymsx_mbbowhZcAjOCz7mk2jY6OgPTwK0_EqjZyE4qSwD7OHydyzDboapD8twvD5gQv-g/DSC02563.JPG)
and fit it with a small self tapper.
![[Image: DSC02559.JPG]](https://enal2w.bay.livefilestore.com/y1p5foUrtKqLuen3Cp8huLmgYmWrGsnSSWfMdIqRh8aKIyTJIDgCqgfWp34U4cwSyuPN4xygXpshHiU8yUv8k7l8w/DSC02559.JPG)
works a treat...
But i didnt stop there, i fitted HIDs to both low and high beams so got 2 ballasts on both sides. the passanger sides quite tidy as theres a few plases to hide them, but they just flapped about on the drivers side, so i started digging in the garage draws and cubards to see what i could find to help with this untidyness and found this,
![[Image: DSC02567.JPG]](https://enal2w.bay.livefilestore.com/y1pUWfhaHj7lyZWlH6kBisq6aMAd9xcRIikARqKps1wml51j2RGDOHMZgwkfjWLXypp3K6S8qkoxsfykWOsPlvttw/DSC02567.JPG)
which when cut and bent fitted like a glove,
![[Image: DSC02569.JPG]](https://enal2w.bay.livefilestore.com/y1poXwLsQJSDk7T2CjAuq0lxR_bABwzEfM8ogcoAVX-YNja-3r0aOZbR6WNUjmbebTzAYk4wUGVSgwmBUDvHNM1ag/DSC02569.JPG)
![[Image: DSC02568.JPG]](https://enal2w.bay.livefilestore.com/y1piib4rvb77rXWIzmsOqCoLVYGRAM0DZ8Xl0rJwctj2CbIdAptui8PhtyJdj8v8KEo2Mf5d2jjD549C4LwuLvtYQ/DSC02568.JPG)
with both ballasts screwed together its not the best fit but with all the hunting i did looking for stuff i was running out of time so just roughley fitted them to it,
![[Image: DSC02572.JPG]](https://enal2w.bay.livefilestore.com/y1pv2VZCUw8Si10nLAXjkA0TbCX4nYCgvVSyDh4v21LwYLKBO04CQugeOYxRLSZEmNNtw6YOi6X5658xB7bETauDg/DSC02572.JPG)
did a bit of wire tidying with zip ties, and thats done till the next tinkering sunday.
![[Image: DSC02576.JPG]](https://enal2w.bay.livefilestore.com/y1pPlNBfnZ2T_o1f9P4WN7J2XK8cdefUxUpzxBx8WESclzuCNtVu0M1O_78VBzZrFlZChRdwcWAV0fCHuDnfPm27A/DSC02576.JPG)
The holed plate will be sprayed with some black Hammerite i,v got kicking about so that it looks better, if i find it!
![[Image: is200%20catoon.jpg]](http://flq9hg.bay.livefilestore.com/y1pRfa3kPJrnHVEEHC2z47vTNROlbG9FgRzmsEz8ZJ_VKFAF-7kyMer9T68W0uCDsvklEH6MoYkQuRH5knPTs01Eg/is200%20catoon.jpg)
![[Image: 104113415648fa201e2ecb5.gif]](http://i19.photobucket.com/albums/b200/pugtop/104113415648fa201e2ecb5.gif)
![[Image: 91-bluescreen.gif]](http://www.ttp-clan.co.uk/datas/users/91-bluescreen.gif)
Here's my fix posted on another site :Bazza:
Well with today being sunday i spent time tinkering in my garage, tided the place up a bit and sorted out a stereo that i had kicking about for some background music.
So with the garage sorted i turned my hands to the is, got the car in sept last year and about 2 months later the bonet stay snapped on me!
So i just used a bit of hose clipage thing to do till i got a new one, £15 F that!
After looking around my garage for a few hours i came across some clips i bought for something?? and thought they my do the job.....
Just cut away half
and fit it with a small self tapper.
works a treat...
But i didnt stop there, i fitted HIDs to both low and high beams so got 2 ballasts on both sides. the passanger sides quite tidy as theres a few plases to hide them, but they just flapped about on the drivers side, so i started digging in the garage draws and cubards to see what i could find to help with this untidyness and found this,
which when cut and bent fitted like a glove,
with both ballasts screwed together its not the best fit but with all the hunting i did looking for stuff i was running out of time so just roughley fitted them to it,
did a bit of wire tidying with zip ties, and thats done till the next tinkering sunday.
The holed plate will be sprayed with some black Hammerite i,v got kicking about so that it looks better, if i find it!
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
Japarts might be a bit cheaper than Lexus- check Japart's ebay shop
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
1 Guest(s)
1 Guest(s)
Views 358
Last Post by
Views 419
Last Post by
Views 1,012
Last Post by
Views 458
Last Post by