what exhaust + induction for the is200

by D6NGR.., 11-04-2019, 08:32 AM

hi peeps my exhaust has started blowing and has corred from the back box was wondering if this exhaust is any good and also i'm after a good induction/intake for the time being and suggestions and also links to good exhaust places or sites and for induction kits please.

hears a exhaust that i've looked at what you reckon: http://cgi.ebay.co.uk/Lexus-IS200-Cobra-...5199576103

Im Back again

by phil, 11-04-2019, 08:10 AM

Hi ya

Well after a difficult few months, my life is finally sorting itself out, the IS 200 went and was replaced by a Vauxhall, but now that has gone and has been replaced with a Honda Civic Type R FN2.

So i am hoping i am still welcome back with your fellow outlaws?

I see the forum has had an update any other changes i should be made aware off?

Phil

Best way to clean injectors....literally (Redex need not apply)

by jimxms, 11-04-2019, 06:19 AM

It seems that the injectors for my supercharger were placed in a rather dirty plastic zip bag

I've inspected a few of them and they seem to have a gritty substance on the surface so there's no way I'm going to install them without making sure they are 100% clean first.

What would be the best way to clean them up? Could I shoot some MAF cleaner through them for example? I want to make sure that they aren't clogged up with sh** while also giving them a bit of an overhaul before installing them.

Sky Plus help please

by FunkMasterJay, 10-04-2019, 07:06 PM

Hey all.

I have sky plus in my living room. We don't have multi-room, but my wife said there is a gadget that we can get so she can control the box from the bedroom.

I have the normal sky plus (not HD). There are so many on eBay that I want some help first.

Ta.

J

the hunter and lass penicuik car show

by ormi, 10-04-2019, 02:39 PM

well heres some of the pics i took nothing fancy camera wise just an iphone 4 some really nice cars...

New alarm Fitted

by Rabster, 10-04-2019, 10:42 AM

Ok well as most of you know im quite into my electronics so i decided to put the same alarm on the Stag

A avantguard 5.5, well this is what i wanted but the guy i was getting to install it only had the 650 main processor, this is the same module that is in the Avant guard 5.5 so wasn't to fussed by it. so i got the system installed with all the sensors that came with the pre packaged 5.5

Clifford Avantguard 5.5 Features:

Thatcham Approved (Category 1)
Two 5-button Extended Range Remotes
Dual-Zone Proximity Sensor
Tilt/Motion Sensor
Glass Tamper Sensor
Dual-Circuit Immobilisation
SSPS5 Smart Self-Powered Battery Backup Siren
Central Door Locking andTotal Closure Control
Plain-View 2 Code Protected Valet Mode/Override
ACG2 Defeats Remote "Cloning" Devices
Fact 2 (False Alarm Control & Test) Anti-Falsing Circuitry
Secure Access Full-Time Feature Customisation
Low Transmitter Battery Warning
Programming upgrades (PIN free programming, grid jump, etc)

so far i have added the wiring to turn my headlights on via the remote

i will also be adding the total closure for all 4 windows and both sunroofs lol


have to say the guy that did it was top quality and very neat.

Alarm Company



Rabs

Whipsnade Zoo

by E55EX_RACER, 10-04-2019, 07:22 AM

Just a few from yesterday, the full set can be found here as well











The Wolverine...I finally got some of it!! :lol:

Hold on real tight for this !

by BOOSST, 09-04-2019, 03:34 PM

This russian rider has a serious deathwish.. and if you think he is manic to begin with, just wait till the video gets near the end cared:

http://www.angelfire.com/ak2/intelligenc...speed.html

Help me find the Pin-out

by Rabster, 09-04-2019, 12:52 PM

Ok so the radio that was in the stagea when i got it was a sony XAV-60 seems a fairly good unit, so i pulled it out the car today to look into wiring the reverse camera in

and there is no multipin connector on the rear now this connector gives me the following
Front L/R Line Level
Rear L/R Line Level
Sub Line level
AUX1 input Line level
Reverse trigger feed

now i only care about the reverse trigger feed for now as that is what i was going to install

sony technical are of no use and have given me a part number
183420421

which brings nothing up....


so im going back to my normal way of doing things im going to make a connector but need the schematics or pin config of the unit


any ideas people

Rabs

TRD Oil cap

by Phil01, 09-04-2019, 12:36 PM

Thanks to Jimxms for the Oil filler cap he gave me this morning, looks the business fitted.